Set Up Your Lilypad!

To set up your Lilypad, you need three things: your WiFi network name, your WiFi password, and your network security type (most likely WPA2). You also need your Lilypad, your green Lilypad power cable, and the white audio cable that came with your Mimo. Follow the steps below!

1. Power up your Lilypad by plugging the green power cable into both the Lilypad and the black wall outlet plug.
2. Plug the white audio cable into both the Lilypad and the headphone jack on your computer.
3. Turn the volume on your computer all the way up.
4. Enter your WiFi name, password, and network security type (likely WPA2) into the boxes below.
5. Hit "Submit".
6. You should see the Lilypad transition from blinking red lights to a solid green light (or combo green and red, i.e. orange, which means it's charging if the Turtle is attached).
7. If it's green or orange, your Lilypad is configured, and you're good to go!
8. Don't forget to move the Lilypad to the room where the baby is sleeping; it will remember your WiFi information.

Note: You hopefully got here as a result of talking with someone from the Mimo team, but, if not, please feel free to call at 877.415.MIMO (877.415.6466), or email us with questions.